You are here
nobmob.com
Netti - good words
It's not every day I have praise for any shop, so I just want to put a good word in for the chaps at Netti.
Taskled MaxFlex
This is a TaskLED MaxFlex boost driver. It's about 25mm diameter and needs about 7mm depth to clear all components on both sides.
The lump of aluminium next to it (is 3mm thick, BTW) will be glued (with Artic Silver Thermal Epoxy) to the aluminium that the LEDs will be glued to (also with Artic Silver). The MaxFlex has a temperature sensor that reduces LED current if things get too hot - very nice touch.
Carlco + Khatod Height
This shot was to check the height of a 10x10mm Carlco + square XPE (Cree) compared to triple Khatod lens ontop round XPE.
Think the longer legs on the Khatod need filling a little, but the 2x3mm alu (yes - those chunks of aluminium under the emitter/lens combo in the left are 3mm thick) is just about perfect, or will be when they get a little glue between them.
Hornsby Shire Mountain Bike Alliance (HSMBA) Invites Trail Ideas
The first HSMBA Newsletter has been sent to approximately 300 registered members. The Newsletter invites trail ideas AND requests all members to encourage another 1 or 2 friends to register with HSMBA. Please submit trail ideas by April 1st 2009 to info@hsmba.info. There are various ways you can provide your trail ideas..
Dam lazy bones ride
The meeting times are 'ready to ride'. If you need time to prepare equipment then please arrive a few minutes earlier.
King Street (near corner with Arana Street), Manly Vale. You know - outside Manly Hydraulics Lab.
If I don't post it I won't go
So anyone up for a couple of laps or 3 maybe
Pace will be determined on the day
I've sworn off the 'roids, so pace won't be killer
Usual Bloot pace - smell the roses. That type of thing.
Mont 2009 "NoBMoB Team Big Test Icicles" Jersey - orders closing TODAY!
Custom design Mont "Team NoBMoB Big Test Icicles" Jerseys
SNAP ONE UP AT ONLY $ 59 + GST
Quality Aussie-made jersey - custom design for the 2009 Mont 24 hrs.
Wear the NoBMoB logo with pride - (you don't have to race with this team to wear one of these beauties!) 
All sizes from SMALL - MED- LARGE - EXTRA LARGE (still) available.
PM or call Hans ASAP. Orders must close Monday 9th March at 4 PM - to get them printed before 3rd April
