You are here
nobmob.com
Pic of the day? Yeti on Mt Elbert
#SB95 and #SB66C perched at the highest point in Colorado, Mt. Elbert @ 14,433 ft, ready to drop in on a killer descent and one crazy long ride. Good day. | #yeticycles #mtelbert #14ers #fourteeners #biking14ers
Olympic park
Hey guys,
Does anyone ride the monster x trail at home bush? Work is based out there these days and looking to try get a quick spin in prior or after work
[Mod. moved to Sydney (West)]
Wanted: Hardtail wanted medium...
After a hardtail as a second bike. Medium in size...anything out there?
Cheers, Nic.
Withdrawn: Maxxis CrossMark 29x2.1 folding mtb tyre
Note that this is "Withdrawn" so is here for archive purposes only.
Pick up in Frenchs Forest or City - will post at buyers expense.
Taken out by a Wallaby
The key point is that if you hear Wallabys when riding particularly at night, it would be great to stop. The second is that riding alone at night in the bush really should be done with a lot of care.
Terrey Hills Training Ride
The meeting times are 'ready to ride'. If you need time to prepare equipment then please arrive a few minutes earlier.
End of Nerang Avenue in Terry hills where the Perimeter starts. Corner of Nerang and Hillpine Pl.
A training ride to get the mileage up in preparation for Kowalski.
I'm planning on Perimeter then in to Long track then back to where we started, that is around 20ks. Then a second lap of the same thing to make it 40ks in total. Should take about 2hrs or something like that.
A bit of company would be brilliant to make it a tad more enjoyable and hopefully faster as well.
Linking Oxford Falls to Terrey Hills
Does anyone know of a decent link through Oxford Falls to Terrey Hills. Happy to hike a bit if there's a connecting trail that is not legal for bikes....
Back on the dirt?
Well... no-one likes a smart @rse, but... told you it would be a good weekend 
Talas/Float conversion 140mm
Hey all,
Wondering if anyone has done a talas to float conversion on a 32mm fork (or who has worked on floats a bit). I've got all the parts but wasn't sure which way the negative spring cup is inserted into the stanchion. Is it so the spring sits inside the cup when installed? Or other way around so cup is upside down and spring sits on outside base of cup if that makes sense. I assembled it dry the first way and have 148mm showing on the stanchion after putting 60 psi in it. That's from top of dust seal lip to crown.
Any input appreciated,
Cheers.
