Rob's Dimmer Control (in enclosure)

Although the PCB was used as a template somehow the holes thought the transparent box and into the aluminium frame didn't quiet mesh and those PCB holes had to be enlarged (on the right - lucky there was room).

The switches have waterproof 'boots' and all other holes will be filled with sealant to make this pretty much water tight.

Back switch (left in photo) is on/off, on being down so it won't get knocked 'off' if by some chance we hit any hanging branches. Left switch (top in photo) gives three position dimming.

Two trim pots (blue - to the left of the photo) give adjustment for the two lower 'dim' levels.