Gluing Optics

Gluing the optics to LED holder. Note how runny this epoxy is - I don't like it at all, but thankfully it did the job.

The grey thing on top is the perspex lens cover placed there to make sure the centre Khatod lenses stay square.

Also note the MaxFlex in the background now fixed with Arctic thermal epoxy to the LED holder. After some tests and few emails with TaskLED support turns out that is not what you are supposed to do. So the MaxFlex was removed and will be fitted to part of the outer case far from the LEDs. Yes, the MaxFlex's thermal shutdown system is for the controller itself, not to monitor your LEDs - Doh!