Crank brothers make some great ones, make you sure you get a chain tool in it as well as all the usual allen keys torx keys etc.. Or you can use a leatherman. I use both
Small individual tools better and more usable, some of the multi tools don't allow use of different tools at the same time.
If you want to go that way make sure the tool completely seperates for use.
I have a wrap with small pockets to keep them all together.
I have a Topeak Mini 18 or or 22 something that comes in a wetsuit rubber pouch that works well. Includes a chainbreaker that I've used on a couple of occasions to get mates out of a long walk back to their car. Have had it for a few years, was well worth the money.
The point of being able to separate into two parts is a good one, but given that some parts you need two of the same sized allen key (eg thru suspension pivots), buy two or just borrow the second one off a member of your posse on the day.
Submitted by pharmaboy on Sun, 25/11/2012 - 06:28.
SPD pedals are bottle openers so opener not needed!
Topeak for me, but troubles out on the trail, can confound a simple multi tool - eg stuck valve that can't be removed for a flat (need pliers/leather man ) - I also have a lightweight tool that's a number of needed bits and light chain breaker wrapped up in tape (2 torques sizes is a pita)
I bought one a while ago and it cost me a small fortune. Its sat in its lovely little storage can and has hung under my Gobi in the tool bag for the last 18 months at most. The Gobi tool bag is pretty damn water proof and i refuse to ride trails when they are soaking wet, but this multi tool has turned to absolute shit.
I took it out of the bag a couple of months ago and its got rust all over it and just looks like a cheaper than Bunnings quality tool now. Pretty sure it was the worst $100 odd dollars i have ever spent in my 2 years of cycling.
I have been meaning to contact the distributor about it but i dont like my luck. I thought being Crank Bros and worth a small fortune that it would be much better quality than it is
I have used a Topeak on similar to the one in the link for a few years now.
I like the little chain hook it comes with which holds the two ends of the chain while joining it.
Crank brothers make some great ones, make you sure you get a chain tool in it as well as all the usual allen keys torx keys etc.. Or you can use a leatherman. I use both
Small individual tools better and more usable, some of the multi tools don't allow use of different tools at the same time.
If you want to go that way make sure the tool completely seperates for use.
I have a wrap with small pockets to keep them all together.
I have the crank bros multi 17. Does the job fine have used it multiple times on the trail and at home.
My only gripe is that it rusts.
Park Tool.
MTB 3
Comes in 3 pieces so you can split them to better fit in a camelback, or leave parts out.
Chain tool
Tire levers (2)
Phillips head screwdriver
Straight blade screwdriver
T25 star-shaped driver
1.5, 2, 2.5, 3, 4, 5, 6, & 8mm hex wrenches
8, 9, and 10mm box end wrenches
Bottle opener
0.127", 0.130", & 0.136" spoke wrenches
Pedal wrench
Serrated knife
I have a Topeak Mini 18 or or 22 something that comes in a wetsuit rubber pouch that works well. Includes a chainbreaker that I've used on a couple of occasions to get mates out of a long walk back to their car. Have had it for a few years, was well worth the money.
The point of being able to separate into two parts is a good one, but given that some parts you need two of the same sized allen key (eg thru suspension pivots), buy two or just borrow the second one off a member of your posse on the day.
Mine's been great.
It has a bottle opener.....
Dan....I still owe you a tube,
Lets go for a ride around Red hill.!!!!!
Whatever multitool has a chain breaker. a few allen keys to adjust brakes, seats, pedals & shit on the run is all you need.
SPD pedals are bottle openers so opener not needed!
Topeak for me, but troubles out on the trail, can confound a simple multi tool - eg stuck valve that can't be removed for a flat (need pliers/leather man ) - I also have a lightweight tool that's a number of needed bits and light chain breaker wrapped up in tape (2 torques sizes is a pita)
I have a Kathmandu multi tool. Bought it on sale for about $10 and it's really good.
I wouldnt touch another Crank Bros multi tool.
I bought one a while ago and it cost me a small fortune. Its sat in its lovely little storage can and has hung under my Gobi in the tool bag for the last 18 months at most. The Gobi tool bag is pretty damn water proof and i refuse to ride trails when they are soaking wet, but this multi tool has turned to absolute shit.
I took it out of the bag a couple of months ago and its got rust all over it and just looks like a cheaper than Bunnings quality tool now. Pretty sure it was the worst $100 odd dollars i have ever spent in my 2 years of cycling.
I have been meaning to contact the distributor about it but i dont like my luck. I thought being Crank Bros and worth a small fortune that it would be much better quality than it is
I have used a Topeak on similar to the one in the link for a few years now.
I like the little chain hook it comes with which holds the two ends of the chain while joining it.
http://www.topeak.com/products/Tools/hexus2
No issues with it at all.
have a fat spanner which i am still very happy with.
Another +1 for the Top Peak.
I've had mine for about 18months now, it's a bit rusty but still works fine. A quick spray with wd40 every so often helps.
I have a hexus 2 its a solid bit of kit. I also carry a little lezyne v5 - It is rather beautiful.
http://www.evanscycles.com/products/lezyne/v5-mu...
I vote this one - http://www.parktool.com/product/i-beam-mini-fold...
Hasn't let me down yet!
Topeak 22 or what ever it is. I've got one for racing in my saddle bag. Nice and light, super tough and useable.