Withdrawn: 2013 WHYTE M109S Enduro Cross Country Bike

Note that this is "Withdrawn" so is here for archive purposes only.

This Size M 29" bike was bought in April last year and a whole lot of light weight components were added. The bike is in excellent condition as most of it's work has been on cycle paths. Some very minor cable rub marks only.

Spec’s as follows:

Frame: 6061 T6 Aluminium Front Triangle with Tapered Head Tube and alloy rear Triangle with E-Thru dropouts

Fork: Fox Float 32 Performance 29" with CTD FIT, 100mm Travel, Tapered steerer and 15QR

Shock: Float Performance with Boost Valve, Rebound Adjustment and CTD Adjust

Headset: FSA Orbit ZS, 1.5" Cartridge Sealed Lower Bearing Lower and Cartridge Bearing 1 1.8" Upper Bearing

Brakes: FRM DB250 with carbon hoses (480g!); Rotors – brand new Shimano XTR; 180mm front, 160mm rear

Shifters: SRAM XX, 10 Speed

Front Derailleur: SRAM XO High Direct Mount, 10 Speed

Rear Derailleur: SRAM XX

Cassette: SRAM XX 36-11

Chain: SRAM 1091 XX

Crankset: FRM Cu2-M Scandium 2x10 (24/38) with FRM Bottom Bracket (664g including BB!)

Bar: Oval Concepts 850 Carbon Flat Bar (710mm wide, 9deg sweep, 5mm rise/drop) with Oval Carbon Stem

Saddle: Whyte Custom dual density, triple panel design

Wheels: Whyte XC-209 Alloy set up to run tubeless. These wheels have not been off road. I have used them as training wheels only fitted out with slicks.

Tyres: Brand New Maxxis Ikon

Enduro Mag’s assessment of the base level version:

http://enduromag.com.au/site/enduro-mag-news/bri...

Spares:
• brand new XO front derailleur
• used SRAM XX Cassette & chain it was used with - in good condition