You are here


TaskLED

daves's picture

Fatman

Taskled Fatman.

A good choice for current driver if you don't need the high tech microprocessor control features of a MaxFlex.
Will output up to 1000mA and 16V. Input voltage must be lower than output as it is a boost driver.

Rob's picture

Taskled MaxFlex

This is a TaskLED MaxFlex boost driver. It's about 25mm diameter and needs about 7mm depth to clear all components on both sides.

The lump of aluminium next to it (is 3mm thick, BTW) will be glued (with Artic Silver Thermal Epoxy) to the aluminium that the LEDs will be glued to (also with Artic Silver). The MaxFlex has a temperature sensor that reduces LED current if things get too hot - very nice touch.

Best Mountain Bike