You are here
perthmtb.asn.au
Waterproof treatments to re waterproof a rain jacket?
So I stayed off the sodden trails on the weekend and instead headed out on the road. I've got a 6 year old "waterproof" jacket.
Netti with Entrant that was meant to be like goretex. Anyway riding on the weekend my jacket just became wet and slowly seaped through. My partners jacket is the same model but only two years old and the water was beading straight off hers.
This is the jacket http://www.bicyclehq.com.au/clothing/jackets-and...
Anyone had any luck with waterproofing treatments? Any recommendations?
front brake leaver problem
On my Avid Elixir 5 front brake
when i press the brake leaver in, it brakes fine but when i release, the leaver releases back slowly.
any ideas of what could have gone wrong?
any advice would be greatful
Converting to tubeless on Giant p-xc2 rims
Hi guys
Does anyone have any ideas of how i could convert to tubeless on the Giant P-XC 2 rims, which have come off my Giant Anthem x2 2011
any suggestions would be greatful
South Australia Kona Mawson Cancelled
More info here: www.rotorburn.com
seat post height
If your seat post is past the max limit, what damage can that do to the bike and the seat post?
Avid Elixir 5 brakes
I have a set of Avid elixir 5 brakes on my Giant anthem x2 2011
They make weird rubbing sounds when i brake, especially my rear brake
is there anything i need to do to make them perfect brakes?
Giant anthem x2 2011, knocking off weight
i got a new giant anthem x2 2011 last week and i was thinking of knocking off abit of weight
i was looking at getting a new seatpost (as the 305mm is too small) and new cranks
can anyone recommend me any good brands
Giant rims
Giant have made their own rims and installed them on the 2011 anthems
Does anyone know if these rims are good for cross country riding??
Old ATX into a new shiny 29-er?
Hi all,
So, I have my old trusty Giant ATX760 which has been with me since the early 90's and still goes strong! Last year I overhauled it with 2010 XT - complete groupset!
My question is - has anyone had any experience 'converting' their frames to 29-inch specs? Old or new will help.
I'm thinking of upgrading the wheels to 29-ers and in theory they'll fit (I've measured both front and rear wheel arches / forks, etc. I'll have to alter the calipers (am thinking of going disk anyway!) grip length, but other than that - it should work, no?
Any experiences / ideas / thoughts?
Rear shock lock out
I have a Trance X2 2011 only 2 months old and I am new to MTB riding
when rear shock RP2 is locked out how much travel should there be, seems to be the same
where ever the lever is dose the lock out position only make it stiffer