You are here
nobmob.com
Rest of World Singlespeed Championships
The meeting times are 'ready to ride'. If you need time to prepare equipment then please arrive a few minutes earlier.
Pig & Whistle Pub, Rotorua
Immediate Release: April 1 2009.
It's official.
The Pig & Whistle Singlespeed Mountain Bike Championship in Rotorua, New Zealand will be the 2009 Rest of the World Singlespeed Champs.
UCI director of one-geared racing, Sweden’s Mikael Kalle Blomkvist, made the announcement at a packed press conference at the organization’s headquarters in Switzerland, early this morning. “We think the Kiwis have cracked it again,” said Blomkvist. “Their first national singlespeed championship in 2008 was a huge success and we felt it was time to recognize this.”
Is Farkin in trouble
Apologies for using Nobmob as my communication means, however I know there are quite a few NobFarkers or Farker mobs if you will. (uhmmm now I know why it got banned 
)
found this when I was logging in this morning ... the banners and whatnot don't cut & paste as nice.
"Prohibited Content
Access to the requested domain has been blocked by your ISP, on behalf of the Australian Government. Please note that repeated attempts to access prohibited materials will be recorded, and submitted to the Australian Federal Police for further investigation.
MaxFlex Sink
MaxFlex mounted on 'reach around' sink with both gold pad contact area underneath (heat from switcher IC) and top mounted inductor in contact. Works like a charm
Thick wires are (likely overkill) for power in, thin are control and to LEDs which are lower current.
Career in the Cycling World
Hi Guys,
I am looking for any tips or pointers that you guys may have when it come to entering the big bad and underpaid world of the cycling industry. I would like to start off in wholesale, but will look at retail opps, plus I would love to pick up the skills of a mechanic.
I am over qualified, in my early 30's and love cycling.
Discuss.....
and yet another DW100 entry for sale.
as it cost $110.
Call me, number is in my profile.
Cheers,
Loz
MaxFlex Clamp
This is my second attempt at a MaxFlex fitting after realising it should not be attached to the LED holder. After removing the previous effort (very lucky to be able to get a hack saw on it) there was some 3mm aluminium still fixed with Arctic thermal epoxy to the gold section on the MaxFlex. That will be attached to the base of this aluminium here.
Gluing Optics
Gluing the optics to LED holder. Note how runny this epoxy is - I don't like it at all, but thankfully it did the job.
The grey thing on top is the perspex lens cover placed there to make sure the centre Khatod lenses stay square.
Glued Switch
What happens when the epoxy you're using to make a case mounted tactile switch goes wrong.
